Contact Us
- No.97, 4th Avenue, Binhai Economic and Technology Development Zone, Wenzhou, China
- sales@gzp-valve.com
- +86-577-85859689
Non-rising Stem Gate Valve
The Non rising stem gate valve uses the compensation function of the elastic gate to achieve good sealing effect. The valve has the characteristics of overall rubber coating, corrosion resistance, not easy to break and long service life.
Description
The Non rising stem gate valve uses the compensation function of the elastic gate to achieve good sealing effect. The valve has the characteristics of overall rubber coating, corrosion resistance, not easy to break and long service life. It can be widely used in fluid pipelines such as tap water, sewage, construction, food, electric power, medicine, metallurgy, light textile, energy source system and so on.
Ductile-iron valve that meets or exceeds the requirements of AWWA C509. Since they are all ductile iron, they also meet or exceed the requirements of AWWA C515. Valves are available in all end configurations including grooved ends, tapping valves, and OS&Y. Every valve is 100% tested beyond AWWA C509, including low pressure testing. All valves are certified to NSF 61 and NSF 372, meeting all requirements of the Safe Drinking Water Act.
The range of GZP Non rising gate valve design is as follows:
Features Include:
● Pressure rated at 200 PSI (2″–12″)
● Available in sizes of 2″ to 24″
● Solid wedge
● Pressure rated at 150 PSI (14″–24″)
● Non-Rising stem
● Bolted bonnet
End Connection:
● Flanged (FLG)
Face to Face Dimensions:
● Conforms to ANSI B16.10 (125 Lb)
Standards:
● Conforms to MSS SP-70
Flanges: BS EN 1092-2 PN 16
Design: DIN 3352 Face to face length: BS 5163
Installation: horizontal
APPLICATIONS • Water supply • Drinking water • Fire fighting systems • Waste water treatment plants
Epoxy paiting suitable for drinking water applications.
|
Technical Data |
|
|
Design Standard |
MSS SP-70, AWWA C515 |
|
Body Material |
Cast Iron OR Ductile Iron |
|
Pressures range |
Class 150lb PN10/PN16 |
|
Size range |
2" to 24" DN50 to DN600 |
|
Face to Face |
ANSI B 16.10 (125lb),BS 5163 |
|
Flanged RF , FF Ends |
ASME B16.5 ≤ DN600 (24") |
|
Temperature range |
-29°~120°C |
|
Design Feature |
|
|
Construction |
Pressure seal,Bolted Bonnet |
|
Wedge Type |
Elastic wedge, |
|
Stem Design |
Non-rising stem |
|
Seat Sealing |
Rubber , |
|
Valve Operation |
Gear,pneumatic,Hydraulic,Electric actuators. |
|
By passes,locking devices,extended stem,etc |
|
|
Fire Safe Design |
API 607,BS 6755 |
|
Inspection and Test |
|
|
Visual Inspection |
MSS SP-55, AWWA C509 |
|
Material Inspection |
PMI Test----Chemical Analysis |
|
HB Test---Hardness Test |
|
|
UT---Ultrasonic Test |
|
|
RT---RadiographicTest |
|
|
MT---Magnetic Test |
|
|
NDT Test Non-destructive |
|
|
Dimention inspcetion |
According to drawings |
|
Valve Inspection and Test |
API 598,DIN 3230,EN 12266,BS 5146 |
Materials
Body-bonnet: Ductile iron GGG40, EN-GJS-400
Wedge: Ductile iron GGG40, EN-GJS-400 EPDM covered
Handwheel: Ductile iron GGG40, EN-GJS-400
Stem: Stainless steel X 20 CR 13
Stem seat: EPDM
Bonnet gasket EPDM
Painting Epoxy 250 mcr
These gate valves are suitable to be installed in drinking water plants, being internally and externally coated with epoxy powder painting, not toxic. These gate valves are inside screw, non rising stem in stainless steel AISI 420, vulcanized wedge in EPDM, with sliding rails on the body. The soft seated gate valves are full bore, no pressure drops, and don't need any maintenance. Operated with handwheel, are suitable on request for electric actuator with outlet flange ISO 5210 F10/F14. Face to face length is according to BS standard 5163.
Hot Tags: Non-rising Stem Gate Valve, China Non-rising Stem Gate Valve manufacturers, suppliers, factory, ss knife gate valve, 6 slide gate valve, chrome gate valve, 3 flanged gate valve, newcon knife gate valve, 40mm gate valve pvc
You Might Also Like
















