+86-577-85859689
PTFE Seat Butterfly Valve

PTFE Seat Butterfly Valve

Design: API609,BS5155,ASME B 16.34,DIN3354,
Face to Face: ASME B16.10,EN 558,DIN 3202
Pressures: range PN6/PN10/PN16/5K/10K/CL150

Description

 

Concentric PTFE seated butterfly valves WAFER ENDS

GZP Concentric PTFE seated butterfly valves for food processing, chemical, and sanitary applications

Designed one or Two Piece body

Wafer Style

Lug Style

Cartridge Seat

Thin Profile Disc

ISO mounting and Shaft

Rated to 150 psi

Vacuum Rated

One piece wafer and lugged body for strength and stability in extreme environments.

Heavy duty top plate is drilled and slotted to ISO 5211 and other existing valve drillings, thus allowing ease of automation and interchangeability.

Two part polyester coated body provides a tough and durable coating against corrosion.

All 316 stainless steel discs are polished to a mirror finish.

Discs have a streamlined design, providing higher Cv and lower pressure drop.

Oversized shafts allow for greater strength and thus more stability to the disc.

A high strength machined Double D connection ensures a positive shaft-to-disc connection.

PTFE and elastomer are both vulcanized to a rigid phenolic ring. This cartridge seat provides a stable platform, eliminating movement of the PTFE and elastomer.

Torque fluctuation is eliminated by the consistent conformity of the seat, provided for by the cartridge design.

Cartridge design allows for full field replacement.

The Flow Line shaft seal is achieved through a continuous pressure exerted from the flatted area of the seat to the machined flatted area of the disc.

Torques List

Shutoff Pressure 2" 2½" 3" 4" 5" 6" 8" 10" 12"

150 PSI Shutoff 170 243 380 563 886 1130 1900 3120 5630 (N.m)

 

Technical data

Design

API609,BS5155,ASME B 16.34,DIN3354,

Face to Face

ASME B16.10,EN 558,DIN 3202

Pressures range

PN6/PN10/PN16/5K/10K/CL150

Size range

DN50(2") ~DN600 (24")

Body Material

Cast iron, Ductile iron, Carbon Steel, Stainless steel, Al-bronze.

NACE MR-01-75/NACE MR-01-03 Special Requirements

Face to Face

ASME B 16.10,EN 558,DIN3202

Fange,Wafer,Lug Ends

ASME B16.5 ≤ DN600 (24")

BS 4504,DIN 2543-2545,EN1092

Temperature range

-20°~ 100°C

Design Feature

Construction

Centric/Center line type

Disc Type

Round Disc

Seat Sealing

PTFE, RPTFE,

Valve Operation

Gear,pneumatic,Hydraulic,Electric actuators.

By passes,locking devices,extended stem,etc

Inspection and Test

Visual Inspection

MSS SP55

Material Inspection

PMI Test----Chemical Analysis

HB Test---Hardness Test

UT---Ultrasonic Test

RT---Radio-graphic Test

MT---Magnetic Test

NDT Test Non-destructive

Dimension inspection

According to drawings

Valve Inspection and Test

API 598,DIN 3230,EN 12266,BS 5146

 

Features & Benefits

  • Substantial PFA liners for 3" through 16" and PTFE liners for 10" through 24"
    Benefit is resistance to permeation leading to extension of product life and operator safety because of lack of atmospheric leakage.

  • Live loaded stem sealing system. Benefit is atmospheric sealing integrity and no manual adjustment over the life of the valve.

  • Low torque. Benefit is smaller operators taking up less space, ease of operation and cost savings with less expensive automation packages.

  • Improved disc design leading to less deflection at higher pressures and tighter in-line seal

  • ISO 5211 Actuator Mounting Pad for standardized actuator mounting

  • Live loaded self-adjusting shaft seal with triple O-ring protection

  • Blow-out proof shaft design for additional operator safety

  • Extended body and disc liner above the shaft seals provide optimum protection of the O ring shaft seals from corrosive media

  • PTFE atmospheric seal protects internal components from atmospheric corrosion and provides locating ring for actuator mounting

  • Fully encapsulated bottom shaft eliminates potential leak path at bottom of valve and eliminates the necessity for further sealing elements

 

Wafer-style butterfly valve

The wafer style butterfly valve is designed to maintain a seal against bi-directional pressure differential to prevent any backflow in systems designed for unidirectional flow. It accomplishes this with a tightly fitting seal; i.e., gasket, o-ring, precision machined, and a flat valve face on the upstream and downstream sides of the valve.

 

Lug-style butterfly valve

Lug-style valves have threaded inserts at both sides of the valve body. This allows them to be installed into a system using two sets of bolts and no nuts. The valve is installed between two flanges using a separate set of bolts for each flange. This setup permits either side of the piping system to be disconnected without disturbing the other side.

A lug-style butterfly valve used in dead end service generally has a reduced pressure rating. For example, a lug-style butterfly valve mounted between two flanges has a 1,000 kPa (150 psi ) pressure rating. The same valve mounted with one flange, in dead end service, has a 520 kPa (75 psi) rating. Lugged valves are extremely resistant to chemicals and solvents and can handle temperatures up to 200 °C, which makes it a versatile solution.

 

FAQ

Q: What's the guarantee time for products?
A: 12 months after installation, 18 months after shipment.

Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.

 

 

Hot Tags: ptfe seat butterfly valve wafer, China ptfe seat butterfly valve wafer manufacturers, suppliers, factory, plastic butterfly valve, square butterfly valve, full port butterfly valve, butterfly valve 2 1 2, butterfly valve 250mm, manual wafer butterfly valve dn150

Send Inquiry

(0/10)

clearall